Research/Experimental Use High Performance Type LC-860 NEW
Features
The LC-860 series of high-functionality zirconia oxygen analyzers was designed based on Toray Engineering's long track record with oxygen analyzers, and enables measurement ranging from ultra-low concentrations to 100% oxygen concentration with a single device.
This series is equipped with our unique zirconia sensor to enable stable and highly accurate measurement over the long term. It can be used in virtually any application, from research to built-in operation in online equipment. Easy to operate by functional key.
Main Specifications
Type | Portable or panel-mounted |
---|---|
Display system | O2 conc.; LED Digital, 6 Digitsl |
Measurement range | 0.1ppm~100vol%O2 (Oxygen Concentration (less than 1ppm) and 0-1ppm or less is out of warranty.) |
Response speed | In 30 sec. after changing sampling gas from Inlet. (90% response) |
Repeatability | Within ±1 % of full scale (Not guaranteed for 1ppm and the 0-1 ppm display range or below) |
Sampling system | Continuos Suction |
Sample gas rate | 200±50 ml/min |
Sample gas conditions | Flow Rate; 1000~2000 ml/min Pressure; 0.03MPa or less Humidity; Dew point shall be lower than ambient temperature. No Flammable Gas, No Halogen Gas, Silica, Corrosive Gas nor Vapor shall be contained. |
Recorder output | Output signal: DC 0-10 V, insulation/load resistance 500 Ω max. |
Communication | Conformed to RS-232C |
Alarm output | Device Error Output Concentration Error |
Self Diagnosis | Warm-up Error, CPU Error,Instruments Over Heat Error,and other 11type |
Automatic refresh function | Apply current to sensor automatically in detecting the deterioration of sensor during air calibration |
Ambient temperature | 0-40 °C |
Warmup time | In 20 min. |
Dimensions | 288(W) × 144(H) × 400(D)mm (Excluding protrusion) |
Weight | Approx. 10 kg |
Gas connection | INLET (Sample Gas); Rc 1/8 BYPASS OUT ; Rc 1/8 OUTLET (Sample Gas); Rc 1/4 |
Power Source | Voltage; AC 100V±10 V Frequency; 50/60 Hz |
Specifications are subject to change due to product improvements.
Dimensions
Front
Rear
Side